JNJ SPAS SPA-8098, Operating Instructions Manual

Page: 9 / 15

9
Ⅱ、
LCD will show present frequency and volume of the radio after turning on the radio
。
Ⅲ、
In the working of radio
，
The volumle of the present radio frequency can be changed by pressing
“
MIN
”
and
“
HOUR
”
Ⅳ、
Pressing the key
“
SET
”
will take out the memorized radio frequency
，
Pressing the key
“
SET
”
continually will take out the memorized radio frequency from channels will be saved at present
channel by pressing this key continually
。
If none of the channel
，
LCD will display
“
---
” 。
Ⅴ、
Press the key
“
MEM
”
could memorize the present radio frequency
，
Pressing the key
“
MEM
”
continually will memorize the present radio frequency in different channel
。
The channel of max is
10
，
Name of channel is 0-9
。
Ⅵ、
The volume can be changed by pressing key
“
SET
VOL+
”
and
“
OPEN
”
11
、
Operation of Pump
：
The Button , operates pump 1
；
The Button
PUMP2
operates pump 2
；
The button
PUMP3
operates pump 3
，
Also the pump 3 is the circulation pump
。
When pump 3 is turned on the LCD will show
“ ”，
whether the heating and circulation is on or off. T he LCD will show w hen pump3 is off and the
heating, including pre-heating and circulation is about to start
12
、
Operation of lasting circulation cleaning
：
Press the key
“ ”
at any time to turn on or off the lasting circulation cleaning, work mode is like the
preset circulation cleaning. The surfing pumps and blower work for 30 seconds at every 30 minutes. Ozonizer
works at every 15 minutes.
Once any surfing pumps or blower start, the ozonizer without working. The ozonizer can not work if the
circulation pump is without working.
IMPORTANT : Please ensure that the ozone function is not in use whilst bathing in the spa
13
、
Operation of spa lights
：
Press the
“ ”
button to
control the ON/OFF of the LED lights
For the first time pressing the key
“ ” ，
the LED lighting on
，
and the colours is changed slowly
；
For the second time pressing
“ ” ，
the current colour unchange
；
For the third time pressing
“ ” ，
Off the lights
。
14
、
Setting the constant Temperature Settings
：
1
）、
Pressing the
“ ”
button will start the constant temperature heating.
2
）
With the setting above, the circulation pump will work automatically.
3
）、
If the temperature is set at 3
5℃,
when the water temperature reaches or exceeds 3
6℃,
the heater
will be turned off automatically and the circulation pump will stop after 5 seconds. When the water temperature
reaches or is lower than 3
4℃,
the heater will start up again.