background image

 

 

11

i.

 

Disposal of water

 

j.

 

Precautions to avoid damage due to water freezing

 

k.

       

Precautions to avoid damage when the appliance is left empty for extended period.

 

         

 

         

2.2 Sub-clause 7

 

     The installation instruction shall state the substance of the following:

 

-

   

Earthed appliances must be permanently connected to fixed wiring;

 

-

   

The appliance should be supplied through a residual current device (RCD) having a rated residual operating 

current not exceeding 30 mA.

 

-

   

The floor has to be capable of supporting the expected load.

 

-

   

An adequate drainage system has to be provided to deal with overflow water.

 

-

   

Details of how to follow the wiring rules, for example, specifying that parts are installed in the correct zone 

and that equipotential bonding is carried out.

 

 

WARNING

 

 

1

DANGER

RISK OF ELECTRIC SHOCK

Connect only to a circuit protected by a Ground 

Fault Circuit lnterrupter. 

2

Grounding is required. The unit should be installed by a qualified service representative and 

ground. 

3

FOR YOUR SAFETY-This product should be installed by a professional service   

      technician,qualified in hydrotherapy bath installation. 

4

lt’s prohibited to cover the instrument with something while opeating. 

5

when using at the first time ,Be sure there is water in heater pipe before staring. 

6

parts containing live parts, except parts upplied with safety extra-low voltage not    Exceeding 

12V,must be inaccessible to person in the bath

 

8

earthed appliances must be permanently connected to fixed wiring

 

9

the appliance should be supplied through a residual current device (RCD)having a rated 

residual operating current not exceeding 30 mA. 

1

0、

If the mains cord of this appliance is damaged,It must only bereplaced by our service 

representative,As special tools and/or parts are required 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SPA-8098
















Reviews: