JNJ SPAS SPA-8098, Operating Instructions Manual

Page: 6 / 15

6
ON
OFF
Fig.7
：
Pre-heat On
图
8
：
Pre-heat Off
Pre-heating is set when the spa is in the “Power off” status and the LCD display shows
“
---
”
1
）
Set preheating
2
）
Time setting for Preheating
3
）
Continual time of preheating
4
）
Preset temperature
5
）
Finished
1
） 、
Press
“”
and enter Pre-heating setting mode, and the LCD flashes of “ON” ,Press
“ ”
can
turn on the pre-heating setting and pressing
“ ”
again , will turn off the pre-heating.
“
ON/OFF
”
on
LCD will show “ON
”
and will not flash. Press
“ ”
to turn off pre-heating. The LCD will show
“
OFF
”
without flashing. When the system enters into pre-heating mode, the setting time will flash on the LCD (this
time is the pre-heating time) at this moment, only
“
MIN
”
and
“
HOUR
”
are available to change the