JLG Toucan 12E, Operation And Safety Manual

Page: 68 / 136

SECTION 4 – MACHINE OPERATION
4-14 – JLG Lift – 31210162
4.10 SHUT DOWN AND PARK
Shut down and park the ma chine as follows:
1. Drive the machine to a reasonably well-protected and
well-ventilated area.
2. Ensure the platform is fully lowered.
3. Turn the platform/ground selector switch to off and remove
the key to disable the machine and prevent unauthorized
use.
4. At the ground control station, position the emergency
stop switch to the off (pushed in) position.
5. If necessary, cover the platform console, the instruction
placards, caution and warning decals so that they will be
protected from hostile environment.
6. If necessary, charge the battery.
4.11 BATTERY CHARGING
NOTE: Be sure that the machine is parked in a well-ventilated
area before charging begins.
ONLY PLUG THE CHARGER INTO A PROPERLY INSTALLED AND
GROUNDED OUTLET. DO NOT USE GROUND ADAPTORS OR MODIFY
PLUG. DO NOT TOUCH NON-INSULATED PORTION OF OUTPUT CONNEC-
TOR OR NON-INSULATED BATTERY TERMINAL.
DO NOT OPERATE CHARGER IF THE AC SUPPLY CORD IS DAMAGED OR
IF THE CHARGER HAS RECEIVED A SHARP BLOW, BEEN DROPPED OR
OTHERWISE DAMAGED IN ANY WAY.
ALWAYS DISCONNECT THE AC SUPPLY BEFORE MAKING OR BREAKING
THE (POS/NEG) CONNECTIONS TO THE BATTERY.
DO NOT OPEN OR DISASSEMBLE CHARGER.
NOTE: It is not necessary to charge the battery if the electrolyte
specific gravity has not dropped under 1.240kg/l. Doing
so regularly, will greatly reduce battery life.
The battery charger AC input plug (1) is located on the battery
compartment.