JLG Toucan 12E, Operation And Safety Manual

Page: 123 / 136

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31210162 – JLG Lift – 6-47
6-6 Communication
6-7 Accessory
DTC FAULT MESSAGE DESCRIPTION CHECK
6632
CANBUS FAILURE - MASTER
MODULE The control system failed to receive messages
from the Master Module (right controller). Refer problem to a qualified JLG mechanic.
6633
CANBUS FAILURE - SLAVE
MODULE The control system failed to receive messages
from the Slave Module (left controller). Refer problem to a qualified JLG mechanic.
6634
CANBUS COMM LOST The platform module failed to receive messages
from both the master and the slave modules. Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK
672
FUNCTIONS CUTOUT - SOFT
TOUCH DETECTED An obstacle has been detected by the soft touch
device (if equipped). • Clear the obstacle.
Refer problem to a qualified JLG mechanic.
673
FUNCTIONS CUTOUT - GATE
OPEN DETECTED If equipped - Platform entry gate is detected open. • Check if the Gate Limit Switches are damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.