JLG Toucan 12E, Operation And Safety Manual

Page: 109 / 136

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31210162 – JLG Lift – 6-33
229
FUNCTION PROBLEM -
TRIGGER PERMANENTLY
CLOSED The trigger switch was closed during power-up in
platform mode. • Check if the trigger switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2210
TRIGGER CLOSED TOO LONG
WHILE IN NEUTRAL The trigger switch was closed for more than
seven seconds while the joystick was centered. • Check if the trigger switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2233
FUNCTION ENABLE RELAY -
INVALID SIGNAL There is a problem with the Function Enable Relay. Refer problem to a qualified JLG mechanic.
2240
LIFT ENABLE SWITCH
PERMANENTLY SELECTED The Lift Enable Switch was closed during power-
up in platform mode. • Check if the lift enable switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2241
LIFT ENABLE SWITCH
PERMANENTLY SELECTED The Lift Enable Switch was closed during power-
up in platform mode. • Check if the lift enable switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2242
FUNCTION LOCKED OUT -
MAST JOYSTICK NOT
CENTERED The Mast Joystick was not centered at power-up
in platform mode. • Release joystick and allow to center.
• Check if the joystick is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2243
FUNCTION LOCKED OUT - JIB
JOYSTICK NOT CENTERED The Jib Joystick was not centered at power-up in
platform mode. • Release joystick and allow to center.
• Check if the joystick is not obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2244
GATE LIMIT SWITCH - FAULTY If equipped - A problem has been detected in this
function. • Check if the Gate Limit Switches are damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK