SECTION 3 - MACHINE OPERATION
1001070451
LIFTPOD by JLG
1-877-254-3876
3-20
www.liftpod.com
1-877-2-LIFTPOD
The base frame can be moved by the mast stump and the frame to
fit through doorways sideways (see Figure 3-25.).
Parking and Storage
• Move machine to a dry, well-protected and well-ventilated
area out of direct sunlight.
• Ensure the platform is fully lowered. If installed, move the
powerpack’s direction control switch to the
OFF
position.
• If necessary, remove the cordless drill or optional power-
pack from the platform to prevent unauthorized use.
• Ensure the swivel castor is retracted and the machine is
resting on the adjustable feet.
NOTICE
DO NOT STORE IN LOCATIONS WHERE THE MACHINE MAY ACCUMU-
LATE ICE, GREASE OR AIRBOURNE DEBRIS.
Vehicle Transport
When transporting the machine by vehicle, it should be disassem-
bled into its major components (see Figure 3-1.) and each compo-
nent secured separately. Restrain each component of the
machine securely during transport. Ensure the swivel castor is
retracted in the base frame and the base frame is resting on the
adjustable feet.
NOTICE
USE OF EXCESSIVE FORCE WHEN SECURING MACHINE CAN CAUSE
DAMAGE TO THE MACHINE.
Secure machine to the transport vehicle with adequately rated
rope or straps. Do not overtension such devices and place a
buffer between the device and any part of the machine.
Figure 3-25. Moving base through a door
FS.book Page 20 Wednesday, February 11, 2009 11:54 AM