SECTION 3 - MACHINE OPERATION
1-877-254-3876
LIFTPOD by JLG
1001070451
1-877-2-LIFTPOD
www.liftpod.com
3-17
Unpowered Descent
The platform manual descent crank (Figure 2-8.) is provided to:
• Allow the platform operator to lower the platform in the
event that the cordless drill or powerpack batteries run out
of sufficient charge to lower the platform;
• Allow ground personnel to lower the platform in event that
the platform operator becomes incapacitated.
For emergency operation please see Section 4 - Emergency Pro-
cedures.
3.6 TRANSPORT AND MANEUVERING (MOVING)
General
The machine may be manually maneuvered or transported in a
vehicle disassembled.
DO NOT ATTEMPT TO TRANSPORT OR MOVE MACHINE UNLESS THE
CARRIAGE IS FULLY DOWN AND THE CARRIAGE TO MAST LOCK IS
ENGAGED. DO NOT MOVE MACHINE WITH PERSONNEL IN PLATFORM.
WHEN TRANSPORTING THE MACHINE, ENSURE THE ROPES ARE PRO-
TECTED AND NOT DAMAGED.
The machine may be moved around a worksite using the following
methods:
• Fully assembled, pushed around the floor using the
wheels and castor;
• Fully assembled, tilted over.
• Disassembled, with each major component carried sepa-
rately.
FS.book Page 17 Wednesday, February 11, 2009 11:54 AM
