SECTION 3 - MACHINE OPERATION
1-877-254-3876
LIFTPOD by JLG
1001070451
1-877-2-LIFTPOD
www.liftpod.com
3-7
NOTE:
When reversing the procedure to disassemble the
machine, pull the platform latch handle (
C
) to disengage
the platform from the carriage.
6.
Fasten lanyard securely around the handle of the cord-
less drill. Attach the cordless drill to the top of the drive-
shaft, either using the supplied 7/16 (11mm) deep well
drive socket (located in manual pouch), or by tightening
the drill chuck directly to the hexagon on top of the
driveshaft (see Figure 3-9.).
CORDLESS DRILL LANYARD MUST BE INSTALLED BEFORE ELEVATING.
DO NOT DROP DRILL.
Figure 3-9. Cordless drill installation
Driveshaft
Drive Socket
Lanyard
Cordless Drill
(optional)
Manual Pouch
FS.book Page 7 Wednesday, February 11, 2009 11:54 AM
