JLG 3369electric, Service And Maintenance Manual

Page: 9 / 46

SECTION 1 - SPECIFICATIONS
3120768 – JLG Sizzor –
1-3
KEY TO LUBRICANTS:
HO - Hydraulic Oil -Kendall Hyken 052
EPGL - Extreme Pressure Gear Lube
NOTE: Be sure to lubricate like items on each side of the
machine.
Recommended lubricating intervals are based on
machine operations under normal conditions. For
machines used in multi-shift operations and/or
exposed to hostile environments or conditions, lubri-
cating frequencies must be increased accordingly
Table 1-4. Lubrication Chart
INDEX
NUMBER
COMPONENT
NO/TYPE LUBE
POINTS
LUBE/METHOD
INTERVAL
HOURS
COMMENTS
1 Hydraulic Oil Fill Cap/Drain Plug HO-Kendall Hyken 052 8/800 Check oil every 8 hours of operation.
Change oil every 800 hours of operation.
2 Torque Hub Fill Plug/Half Full EPGL-SAE 90 2000 Check oil level at side plug on hub.
3 Wheel Bearings N/A MPG - Repack 800 2 years
4 Sliding Pads Wear Pads (8) MPG - Brush 50 N/A
5 (not s hown) Hydraulic Filter Element N/A Replaceable Element 40/250 Replace filter element after first 40 hours of
operation then every 250 hours thereafter.
Figure 1-1. Lubrication Chart