SECTION 4 - MACHINE OPERATION
4-26
3121734
Telescoping the Boom
NOTE:
The telescope function is not operable beyond the transport
position if the axles are not fully extended.
To extend or retract the main boom, use the Telescope
Control Switch to select In or Out movement.
Swinging the Jib
NOTE:
For 1000 lb. (
454 kg for ANSI markets and 450 kg for CE and
Australia markets
) mode operation, the jib must be centered
and the Jib Swing function is not operable. If the jib is out of the
centered position when in this mode, the jib swing function will
allow the operator to center the jib again.
To swing the jib, use the Jib Swing control to select Right or Left
direction.
4.11
FUNCTION SPEED CONTROL
This control affects the speed of main boom
telescope, jib telescope, and jib lift. Turning the
knob all the way counterclockwise until it clicks
puts drive, main lift, platform rotate, and swing
into creep mode.
4.12
MACHINE SAFETY SYSTEM OVERRIDE (MSSO)(CE
ONLY)
The Machine Safety System Override (MSSO) is
used to override function controls for Emergency
Platform Retrieval only. Refer to Section 6.5,
MACHINE SAFETY SYSTEM OVERRIDE (MSSO)(CE
ONLY) for operating procedures.
To
order
go
to
Discount-Equipment.com
