SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-14
3121734
Platform Console
(See Figure 3-8., Platform Control Console)
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
1.
Drive Speed/Torque Select
The forward position gives maximum
drive speed. The back position gives maxi-
mum torque for rough terrain and climb-
ing grades. The center position allows the machine to be
driven as quietly as possible.
2.
Steer Select
The action of the steering system is opera-
tor selectable. The center switch position
gives conventional front wheel steering
with the rear wheels unaffected. This is for
normal driving at maximum speeds. The
forward position is for “crab” steering. When in this mode
both front and rear axles steer in the same direction, which
allows the chassis to move sideways as it goes forward. This
can be used for positioning the machine in aisle ways or
close to buildings. The back switch position is for “coordi-
nated” steering. In this mode the front and rear axles steer in
the opposite directions to produce the tightest turning cir-
cle for maneuvering in confined areas.
To
order go
to
Discount-Equipment.com
