SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-12
3121734
Begin the "Walk-Around Inspection" at Item 1, as noted on the
diagram. Continue checking each item in sequence for the condi-
tions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF.
DO NOT OPERATE MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
INSPECTION NOTE
: On all components, make sure there are no
loose or missing parts, that they are securely fastened, and no visible
damage, leaks or excessive wear exists in addition to any other crite-
ria mentioned.
1.
Platform Assembly
and Gate
- Footswitch works properly,
not modified, disabled or blocked. Gate latch and hinges in
working condition.
2.
Platform & Ground Control Consoles
- Switches and levers
return to neutral, decals/placards secure and legible, control
markings legible.
3.
Boom Sections/Turntable
- See Inspection Note.
4.
Swing Drive
- No evidence of damage.
5.
Wheel/Tire Assemblies
- Properly secured, no missing lug
bolts. Inspect for worn tread, cuts, tears or other discrepan-
cies. Inspect wheels for damage and corrosion.
6.
Drive Motor, Brake, and Hub
- No evidence of leakage.
7.
Hood Assemblies
- See Inspection Note.
8.
Auxiliary Hydraulic Pump
- See Inspection Note.
9.
All Hydraulic Cylinders
- No visible damage; pivot pins and
hydraulic hoses undamaged, not leaking.
10.
Turntable Bearing
- Evidence of proper lubrication. No evi-
dence of loose bolts or looseness between bearing and
machine.
11.
Steering Spindles and Sensors
- See Inspection Note.
12.
Hydraulic Pump
- See Inspection Note.
13.
Platform Rotator
- See Inspection Note.
14.
Jib Rotator
- See Inspection Note.
15.
Axles
- See Inspection Note.
16.
SkyGuard (If Equipped)
- See Inspection Note.
17.
Diesel Exhaust Fluid (DEF) Tank
(If Equipped)
- Proper
Fluid Level. See Inspection Note.
18.
Air Shutoff Valve (ASOV) (If Equipped)
- See Inspection
Note.
To
order go
to
Discount-Equipment.com
