JJ-CCR ApS 2017
www.JJ-CCR.com
2017 JJ-CCR ApS – 2.00 / Revision 06
77
If all dives take place at sea level then the user can select ”SeaLvl”. This results in a surface pressure of
1013mBar being selected every time.
•
When surface pressure is less than 960 millibar, the controller forces the use of “Auto” altitude setting
(i.e. cannot use the “SeaLvl” setting).
6.20.19
Altitude
(Display Setup)
Via this option it is possible to switch the
automatic altitude adjustment on or off.
If this option is set to ”Auto” then auto-
matic altitude adjustment (mountain lake
mode) takes place for decompression and
with the calibration of the O2 sensors.
Mode
Description
Auto
The brightness sensor measures the ambient light and automatically adjusts the
brightness of the display.
Low
Permanent minimum brightness
Med
Permanent medium brightness
High
Permanent maximum brightness
Cave
Suitable for very dark environments like caves.
•
The brightness of the display is the major determinant of battery life. Up to 80% of the power consump-
tion is to power the display. When a low battery alert occurs, the display brightness is automatically
reduced to extend battery life.
Via this menu item it is possible to flip the controller display through 180
degrees. The assignment of both buttons is also flipped through 180 de-
grees!
6.20.20
Flip Screen
(Display Setup)
