PAGE
22
of
131
Chapter 4
OPERATION
4.1. System Startup
To activate the system, follow these steps:
1.
Plug-in the power supply to the appropriate power source
(see “Power
Requirements” on page 6)
.
2.
Connect the components
(see “Configurations” on page 16)
3.
Locate the red emergency stop push-button
(Fig. 39-1)
on the power supply.
Rotate this button clockwise to unlatch.
4.
The green push-button
(Fig. 39-2)
on the power supply activates the system.
1
2
Fig. 39
-
Power supply
Fig. 40
-
Controller
Ok
SEVERE INJURY OR DEATH
HAZARD. READ AND
UNDERSTAND USER MANUAL
AND HEED ALL WARNINGS.
*** DANGER ***
