PAGE
101
of
131
CX0098 Rev 07.5
5.18. Backpack
The
NAVIC
backpack allows the crawler to carry various accessories. To install the
backpack, see the following steps:
NOTE:
The backpack is only compatible with NAVIC crawlers manufactured
after the spring of 2015.
1.
Allow the Navic
crawler to pivot
exposing the inside of
the left drive module
(Fig. 242)
.
2.
Slide the dovetail nuts
of the backpack into
the accessory dovetail
groove
(Fig. 242)
.
3.
Tighten the
two backpack
screws using the
supplied 3 mm hex
driver
(Fig. 243)
.
4.
Pull the velcro straps
tight around the item
on the backpack
(Fig. 244)
.
Fig. 242
- Pivot and insert dovetail nut
Fig. 243
- Tighten screws
Fig. 244
- Use velcro straps
