PAGE
93
of
131
CX0098 Rev 07.5
5.16.1. Mounting a Pivoting
Probe Holder Frame
1.
Attach the wedges that are to be used with the probe holders
(see Probe
Holder Setup on page 74 for additional details).
2.
Affix the probe holders
(with attached wedges)
to the probe holder frame.
Place the secondary probe holders at the front of the frame
(Fig. 224-1)
while placing the primary probe holders at the rear of the frame system
(Fig. 224-2).
TIP:
Phased array wedges are designed to be pulled along a scan surface.
3.
Mount the pivoting probe holder frame to the crawler
(see Swivel Mount on
page 48 for additional details).
2
1
Fig. 224
- Connect frame to right drive module
