JK2830 Operation Manual Chapter 4 System and FILE
4.2
<FILE>
JK2830 instrument can save the user-set parameter to the nonvolatile memory in
the form of file, so when use the same setting next time user can load a
corresponding file to obtain the parameter set and used last time. By doing so, it
can save the time of setting parameter and improve the production efficiency. The
file manage function of the transformer scanning will be described in the part of
transformer test setting.
Press [FILE] to enter into the file manage page, shown as below.
4.2.1
Setup file for single-group component (*.EST)
100 groups of different single groups of component set file (*.EST) can be saved
in the instrument, but the *.EST file with the number more than 100 should be
saved in external U-disk.
Use
FILE
function on the following File menus, the following data will be saved or
loaded in the form of file, which are called *.EST file.
◼
Control and setting parameter on <MEAS SETUP> page
FUNC
FREQ
LEVEL
RANGE
SPEED
TRIGG
ALC
DELAY
Rsou
AVG
Vm
46
