JK2830 Series Operation Manual Chapter 3 Introduction to [DISP]
16
◼
EASY
◼
START SAVE CSV
2)
Press
D.P.FIX A
to lock the decimal location of primary parameter TEST
result. When the decimal location is locked,
“
▲
”
is displayed. Press
D.P.FIX A
once
，
the last digit will be deleted, and the displayed digit will be reduced by
one.
3)
Press
D.P.FIX B
to lock the decimal location of secondary parameter TEST
result. When the decimal location is locked,
“
▲
”
is displayed. Press
D.P.FIX B
once
，
the last digit will be deleted, and the displayed digit will be reduced by
one.
4)
Press
EASY
to display the test results on easy operation page. On the easy
operation page, the numeric keys( 1 to 9) is response 9 measurement setup.
5)
Press
DISP OFF ON
to close/open the display of the test results.
———————————————————————————————————————
NOTE: Under the following circumstance, the function of decimal lock will be
cancelled automatically to recover to floating decimal point status.
◼
Test function is changed.
In deviation test, the deviation test mode (ΔABS, Δ%, OFF) is changed.
———————————————————————————————————————