Maintenance
(Continued)
Figure (5). Remove the fan screws as
shown previously.
Figure (6). Disconnect ignitor leads x 3.
Figure (7). Remove gas flexitube from
gas control valve right hand side.
Figure (8). Remove gas flexitube from
gas control valve left hand side.
Figure (4). Disconnect connectors shown
x 2.
Figure (1). Disconnect power connector
shown.
Figure (2). Disconnect earth terminal of
power lead from earth terminal bolt.
Figure (3). Place power lead to side.
Figure (10). Remove 3 x screws on front
edge of component tray.
TO REMOVE COMPONENT TRAY FOR SERVICE
Figure (9). Disconnect air tubes as shown
Figure (11). Disconnect thermistor lead
connector.
Figure (12). Tray can now be removed.
Derwent High Efficiency Gas Log Fire
28
