background image

2014

7

SFP3-14-GB

www.jilong.com

I. Location and functions of the control valvecontrol valve

Instructions for use

(P17).

3. Connect one end of the other corrugated pipe (P18) to Port A of the 

control valve, the other end to Port E of the pool. Secure tightly with the 

strap (P17).

4. Check to confirm whether the installation is finished properly, 

afterwards use the sand filter pump to filter the pool water.

Signs

L o c a t i o n 

of control 

valve

Functions

Water flow direction

Filter

Normal filtering to rinse 

the pool

Water flows through the 

filter bed where the sand 

filter pump lies and then 

enters the pool

Backwash Reverse-direction water 

flow to rinse the filter 

bed

Water flows through the 

filter bed where the sand 

filter pump lies and is 

then directly discharged 

from the drain outlet.

Rinse

This function is used 

for first startup. Sand in 

the sand tank is rinsed 

and the sand bed after 

backwashing is leveled. 

Water flows through the 

filter bed where the sand 

filter pump lies and is 

then directly discharged 

from the drain outlet.

Drain

Discharged directly 

from the drain outlet, 

used to lower water 

level or discharge water 

from the pool  

Discharged directly from 

the drain outlet of the 

sand filter pump without 

passing through the filter 

bed

Circulation Circulates pool water 

without passing through 

the filter bed.

Wa t e r   f l o w s   d i r e c t l y 

into the pool through 

the control valve of the 

sand filter pump without 

passing through the filter 

bed

 Closed

C l o s e d   w a t e r   f l o w 

between the filter and 

the pool

Summary of Contents for JL29P423NG













Reviews: