10
SFP3-14-GB
www.jilong.com
Long-term storage and storage in winter
Using the product in a frozen pool may damage the product and
invalidate the quality warranty. If the product has to be used with
antifreeze, propylene glycol may also be used. Propylene glycol is
a nontoxic chemical unharmful to any plastic parts. Other types of
antifreeze are highly toxic and may be harmful to the product’s plastic
elements.
1.Before discharging the water or repostioning of the pool, make sure
the discharge direction is towards the discharging ditch and away
from the home. Review local regulations for special water treatment
requirements.
2.Switch off the product and remove the power plug.
3.After emptying, remove all connected sand filter pumps, corrugated
tubes and filter hoods on the pool wall.
4.Unscrew the drain valve (8) in an anticlockwise direction to completely
empty water inside the body. The drain plug is at the bottom of the
body.
5.Dry the parts of the sand filter pump and corrugated tubes.
6.Lubricate the seal rings and washers in the order below for long-term
storage.
8.The best practice for product storage is to dry the parts and motor
and replace them in the original package. To avoid shrinkage or
corrosion, do not cover or wrap the motor with a plastic bag.
9.Please store the motor and parts in a dry place at 32°F (0°C) ~104°F
(40°C).