[3]
To receive the greatest possible performance and satisfaction from
your Jiffy Power Ice Drill, and to reduce the risk of injury, it is
important that you read and understand the assembly, operating,
maintenance, and safety instructions before using your Jiffy Power
Ice Drill. Contact Feldmann Engineering if you do not understand
any of the instructions in this manual.
Your Jiffy Power Ice Drill is designed and manufactured to provide
safe and dependable operation, provided it is operated in
accordance with the following safety precautions.
Preventing accidents is the responsibility of every power equipment
operator. The safety precautions identified in this manual must be
fully understood and followed by every operator of this Jiffy Power
Ice Drill. Review the safety precautions frequently and never take
chances.
Take the time to become familiar with your Jiffy Power Ice Drill and
its components, and then operate it in a safe manner. Study the
appropriate sections of this manual for the description of the controls
and function of your Jiffy Power Ice Drill. Teach the safety
precautions to all persons who use your Jiffy Power Ice Drill.
Avoid mishandling and abuse of your Jiffy Power Ice Drill.
Handle it with care, as any rough treatment can cause damage
to your Jiffy Power Ice Drill or it can cause a malfunction.
Should the engine stop while drilling, do not attempt to restart it
while the drill bit is in the hole.
Never attempt to adjust or repair your Jiffy Power Ice Drill while
the engine is running. Avoid possible injury from moving parts
by first stopping the engine.
+
Never modify your Jiffy Power Ice Drill in any way. Only Jiffy
ice drills and accessories supplied by Feldmann Engineering or
expressly approved by Feldmann Engineering for use with your
Jiffy Power Ice Drill are authorized for connection and use. The
use of non-Jiffy or unauthorized components may cause
damage or injury and will void the warranty.
Check the tightness of screws, nuts, and bolts at regular
intervals and re-tighten if necessary.
Do not wear loose clothing while operating your Jiffy Power Ice
Drill and keep all clothes and parts of the body (hands, feet,
etc.) clear of the rotating ice drill assembly to avoid being drawn
into the boring drill.
By wearing cleated or spiked shoes, or ice creepers when using
your Jiffy Power Ice Drill, you will find it easier to control the
rotational torque as you drill holes in the ice.
Do not allow children to operate your Jiffy Power Ice Drill at any
time. Do not allow adults to operate your Jiffy Power Ice Drill
without proper operational instructions, including all safety
precautions.
Do not lend or rent your Jiffy Power Ice Drill without providing
the owner’s manual. Be sure that anyone who uses your Jiffy
Power Ice Drill understands the information contained in this
manual.
Give your complete and undivided attention to the proper
operation of your Jiffy Power Ice Drill. To operate it properly,
you must be in good physical condition and mental health and
not under the influence of any substance (alcohol, drugs, etc.)
which might impair vision, dexterity, or judgment.
+
Using your Jiffy Power Ice Drill may be strenuous. If you have
any condition that may be aggravated by strenuous activity,
check with your doctor before operating your Jiffy Power Ice
Drill.
+
Do not operate your Jiffy Power Ice Drill when you are tired.
Fatigue may result in loss of control.
+
Do not carry your Jiffy Power Ice Drill or leave it unattended
while the engine is running.
Only run your Jiffy Ice Drill in well-ventilated areas.
When transporting your Jiffy Power Ice Drill in a vehicle, properly secure
it to prevent turnover, which may cause oil leakage or engine damage.
The Jiffy® 4-Stroke Engine on the Pro4 Lite™ Power Ice Drill is an all
position engine, meaning it can be laid on any side, but not upside-
down. When storing the unit for long periods of time, it is recommended
to set the PRO4 Lite™ down with the spark plug facing upward, the
carburetor facing upward or in the upright (operating) position. Oil can
migrate over time, which may result in some oil leakage. Note: Check
the oil level before each use.
+
Propane is flammable. Caution must be used when handling or storing
your Jiffy Ice Drill’s propane tank.
+
Never store your Jiffy PRO4 Lite™ Ice Drill with propane tank attached.
Always attach, remove or change your engine’s propane tank in a well-
ventilated area.
Never store propane tanks where vapor may reach open spark or
flame.
Only use your Jiffy PRO4 Lite™ Ice Drill for its intended purpose.
PRE-USE PROCEDURE
Before using your Jiffy Power Ice Drill to drill holes in ice, follow this
procedure to prepare for proper and correct use.
•
Find, read, and understand the Jiffy operating/parts manual.
•
Assemble the components of your Jiffy Power Ice Drill as indicated in
the Assembly of Drill section of this manual.
•
Re-read and follow the Starting Instructions section of this manual.
•
If the engine does not run satisfactorily, or if you feel it needs an
adjustment of some kind, go to www.jiffyonice.com to locate your
local Jiffy Service Center. Do not attempt to adjust the engine
operation yourself. Only an authorized service person may make
adjustments to your Jiffy® engine without invalidating the unit
warranty.
•
DO NOT RETURN your Jiffy Power Ice Drill TO THE RETAILER
THAT SOLD IT TO YOU. THEY MAY NOT BE AUTHORIZED TO
PROVIDE REPAIRS OR WARRANTY REPLACEMENT.
ASSEMBLY AND DISASSEMBLY OF DRILL AND POWERHEAD
Jiffy E-Z Connect™ Collar
Connect drill assembly to powerhead by sliding E-Z Connect™ Collar down
and pulling clevis pin out. Then slide drill assembly onto output shaft.
Reinsert clevis pin through drill assembly and output shaft, then slide E-Z
Connect™ Collar up over clevis pin and twist collar slightly to lock pin in
place.
Note: Do not remove clevis pin from collar tether.
