Figure 4.16 network settings
[DHCP Enable]: The DVR is connected to the router which DHCP is open; then DVR will
automatically obtain an IP address.
[IP Address]: The IP address of the DVR is used to login network, the default is:
192.168.1.10.
[Subnet Mask]: Set the DVR's subnet mask, to be consistent with the login computer,
default is 255.255.255.0.
[Gateway]: Set the default gateway of the DVR to be consistent with the login computer,
the default is 192.168.1.10.
[Primary DNS]: Set the DVR's DNS , to be consistent with the login computer, DNS
incorrectly can cause XM Cloud function does not work properly.
[TCP port]: Set the DVR's TCP port, the default port is: 34567.
[HTTP port]: Set the DVR's HTTP port, the default port is: 80.
[HS download] Network speed downloads.
[Transfer Policy]: Set the network transmission strategies, adaptive / quality priority /
smooth priority / network transmission priority four kinds of policy options.
Adaptive: when network bandwidth is small, the preview screen automatically jump to
sub-stream, to ensure smooth preview.
Quality Priority: Whether the network bandwidth is large enough, the preview screen is
always displayed in the main stream, when the bandwidth is not enough screen will
delay.
Smooth priority: Under no circumstances reduce the frame rate, encoder settings
change, reducing the size of the stream, to ensure smooth screen.
4.4.4
Network Services
Configure PPPoE and other functions of the DVR.