alarm input alarm, intelligent analysis and abnormality.
4.3.1
motion detection
By analyzing the video image, when the system detects a mobile signal, motion
detection alarm is initiated, and the linkage functions.
Note: The front-end equipment and this equipment need to enable this feature.
Advanced button same to the right mouse button.
Motion detection function of mixed mode / full analog and digital channels are
different: motion detection alarm digital channels only to turn its function at the local
end, the corresponding remote device connected to the end of the channel will have
motion detection feature is turned on, when the remote device side corresponding
channel has motion detection scene occurs, the local side will be able to achieve its
alarm function, otherwise the motion detection function cannot be achieved, while the
analog channels open as long as the local end manufacturing mobile phenomenon on
the line .
Figure 4.3motion detection
[Channel]: Select the number of channels to be set, the default one channel to the
network camera.
[Enable]: motion detection alarm enable.
[Sensitivity] according to the sensitivity level of the lowest, low, medium, high, very
high, the highest six-speed optional;
Note: where only in motion detection settings and only analog channels can set its
sensitivity of mixed mode / full analog mode.
[Region] Click Settings, enter the settings area is divided into PAL22X18, red area for
motion detection fortified area; the white area is undefended, as shown in Figure 4.5
Settings area. Hold down the left mouse button, draw settings area. (By default the
entire area selected for monitoring area) Note: Mixed mode / full motion detection in
analog mode only regional settings, and only analog channels to set their area.
