hours of continuous recording. [Main menu]> [record]> [record config].
Note: The normal recording equipment, installation of a hard disk with at least one set
to read-write disk (detailed operation, please refer to section 4.5.1)
Figure 4.1 video settings
[Channel] to select the appropriate channel number for the channel set, selectable
settings for all channels unified whole;
[Redundancy] choose redundancy capabilities that enable video file double backup
function, a forthcoming video channels simultaneously recorded onto two hard drives.
There are two devices need to install the hard drive, where a hard disk read-write disk,
a redundant disk (detailed operation, please refer to section 4.5.1);
[Length] to set the length of time for each video file, the default is 60 minutes;
[Mode] setting the video, there are three states: configuration, manual on and off;
Configuration:
video recording in accordance with (general, detection and alarm)
recording type and recording time period set;
Manual:
No matter what state the current channel, select "Manual" button, the
corresponding channel all for normal video;
Off:
No matter what state the current channel, select the "off" button, the
corresponding channel to stop recording.
[week] setting common recording time period within the time set will start recording;
[Type] set record type, there are three types: normal, detection and alarm.
Regular:
In the time period set for normal video, video file type is "R";
Detection:
In the time period set trigger "motion detection", "video block", "video
loss", "Exception Handling" alarm signal, and the corresponding alarm function is
set to open the Video function, start detection recording, video files type "M".
Alarm:
In the time period set trigger external alarm signal, and the "Alarm Input"
function is set to open the video function, start detection recording, video file
type is "A".
4.2.2
playback
