3.
Basic Operations
Note: The button is grayed means did not support.
3.1
Turn on
Plug the power supply and turn on the power supply switch. Power supply indicator light
shining indicates turning on the video recorder. After the startup you will hear a beep. The
default setting of video output is multiple-window output mode. If the startup time is within
the video setting time, the timing video recording function will start up automatically. Then
the video indicator light of corresponding channel is shining and the DVR is working
normally.
Note:
1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
Power supply demands: 220V±10% /50Hz.
Suggest using the UPS to protect the power supply under allowable conditions.
3.2
Turn off
There are two methods to turn off the DVR. Right click mouse to get a desktop shortcut
menu ,then choose Logout option is called soft switch. Pressing the power supply switch is
called hard switch.
Illumination:
1
、
Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and resume previous
working status after power failure.
2
、
Replace the hard disk
Before replacing the hard disk, the power supply switch in the real panel must be turned off.
3
、
Replace the battery
Before replacing the battery, the setting information must be saved and the power supply
switch in the real panel must be turned off. The DVR uses button battery. The system time
must be checked regularly. If the time is not correct you must replace the battery, we
recommend replacing the battery every year and using the same battery type.
Note: The setting information must be saved before replacing the battery otherwise
information will lose.
3.3
System Login
When the DVR boots up, the user must login and the system provides the corresponding
functions with the user purview. There are two user settings. The names are admin, and
default and these names have no password. Admin is the super user purview; default’s
