manualshive.com logo in svg

JF TECH JRC-27F, Manual, Page: 22 / 82

Share
Download
JF TECH JRC-27F Manual Download Page 22

 

 

 

Figure 3.9 Copy to 

11.

 

Up and down keys   

Click the device in the list, click up and down buttons to move the device up and down.   

12.

 

Configuration Status   

Configuration status of each channel, including not configured, connected, not online   

13.

 

configuration front-end information   

The  information  of  the  front-end  configured,  user  name,  password  can  be  set  in  this 

area. 

14.

 

Back   

Return to the previous screen and that is the boot wizard interface.   

15.

 

completed   

Add  the  selected  device  to  the  appropriate  digital  channels,  and  then  enable  the 

channel; the remaining non-selected digital channel is not enabled.   

16.

 

Exit   

Return to the preview screen. 

3.5.3

 

Playback   

There are two methods for you to play the video files in the hard disk. Through shortcut 
menu or form Main menu>Record->Playback. 
Note: The hard disk that saves the video files must be set as read-write or read-only 
state. 

 

Summary of Contents for JRC-27F



















































































Reviews:

No comments