12
2-4 Hardware Installation
Remove the screws that lock the back cover to the system from the back side before
hardware installation procedures (refer to 2-2).
2-4-1 To Dissemble CPU Fan
Before installing CPU, make sure to remove the pre-installed CPU fan by using compatible
screwdriver to remove the screws in the marked spots.
2-4-2 To Install CPU
Please refer to the following instructions and illustration to install a compatible LAG
1151 CPU.
Before installation, please refer to 2-4-1 to dissemble the pre-installed CPU FAN.
1.
Find CPU socket on the board. Please make
sure that CPU socket is facing towards you
and the level is on you right hand side.
2.
Remove the plastic protective plastic cover
from the socket. (Put it to the original place if
CPU is not installed. Do not touch the metal
contact point of the CPU socket).
