manualshive.com logo in svg

JETWAY HPC170SR-ITQ170 Series, User Manual

Share
Download
JETWAY HPC170SR-ITQ170 Series User Manual Download Page 38

 

 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

 
 
 

34 

 

Boot Configuration 

Setup Prompt Timeout 
Use this item to set number of seconds to wait for setup activation key.   
Bootup Numlock State 
Use this item to select keyboard numlock state.   
The optional settings are: [On]; [Off]. 
Quiet Boot 
The optional settings are: [Disabled]; [Enabled]. 
Boot Option Priorities 
Boot Option #1/ Boot Option #2… 
Use this item to decide system boot order from available options. 

3-11 Save & Exit Menu 

 

 
Save Changes and Reset 
This item allows user to reset the system after saving the changes. 
Discard Changes and Reset 
This item allows user to reset the system without saving any changes. 
Restore Defaults 
Use this item to restore /load default values for all the setup options. 
Save as User Defaults 
Use this item to save the changes done so far as user defaults. 
Restore User Defaults 
Use this item to restore defaults to all the setup options. 
Boot Override 
UEFI:xx/… 
Press this item to select the device as boot disk after save configuration and reset 
Launch EFI Shell from filesystem device 
Press this item to launch EFI Shell application (Shell.efi) from one of the available file 
system device. 

 

Summary of Contents for HPC170SR-ITQ170 Series










































Reviews:

No comments

Brands by name

Popular brands

Load more brands