29
Package C State Limit
The optional settings are: [C0/C1]; [C2]; [C3]; [C6]; [C7]; [C7s]; [C8]; [AUTO].
►
Intel RMT Configuration
Press [Enter] to go to next screen to enable or disable ‘Intel Ready Mode
Technology’.
Intel Ready Mode Technology
The optional settings: [Disabled]; [Enabled].
*When set as [Enabled], user can also make further settings in the following items
that appear:
Intel RMT State
Use this item to enable or disable Intel RMT enabling status in BIOS.
►
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
Use this item to enable or disable SATA device.
The optional settings: [Disabled]; [Enabled].
SATA Mode Selection
The optional settings are: [AHCI]; [RAID].
SATA1/2/3/4
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable each SATA port respectively.
Hot Plug
The optional settings: [Disabled]; [Enabled].
mSATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable mSATA device.
►
Network Stack Configuration
Press [Enter] to go to ‘Network Stack’ screen to make further settings.
Network Stack
Use this item to enable or disable UEFI Network Stack.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot
option will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv6 boot
optional will not be created.
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.
