18
3. Align the screw holes on the metal
support to corresponding screw holes of
the spot you wish to install the fixed parts
on the back panel of the system.
4. Lock the metal support to the back panel
of the system.
5. Insert corresponding edges of the fixed
part into the slots of metal support until
them matched. Make sure the fix part is
installed in the way the photo shows, with
protruding tips upwards. User can choose
the height of installing spot.
6.
Tightening up the screw so that the fixed
part can be fitted into the slots of the
metal support tightly. Install other fixed
parts to the system in the same way.
