background image

 

 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

 
 
 

 

iii 

User’s Notice 

Copyright of this manual belongs to the manufacturer. No part of this manual, including the products 
and  software  described  in  it  may  be  reproduced,  transmitted  or  translated  into  any  language  in  any 
form or by any means without written permission of the manufacturer. 
This  manual  contains  all  information  required  for  the  utilization  of  this  product  to  meet  the  user’s 
requirements.    But it will change, correct at any time without notice. Manufacturer provides this manual 
“as  is”  without  warranty  of  any  kind,  and  will  not  be  liable  for  any  indirect,  special,  incidental  or 
consequential  damages  (including  damages  for  loss  of  profit,  loss  of  business,  loss  of  use  of  data, 
interruption of business and the like).   
Products and corporate names appearing in this manual may or may not be registered trademarks or 
copyrights of their respective companies, and they are used only for identification or explanation and to 
the owner’s benefit, without intent to infringe. 

 

Package Contents 

 

 

 

 

 

 

X1 

X1 

X1 

X1 

X2 

Optional 

 

Environmental Protection Announcement   

Do  not  dispose  this  electronic  device  into  the  trash  while  discarding.  To  minimize 

pollution and ensure environment protection of mother earth, please recycle. 

 

 

 

Summary of Contents for HPC170SR-ITQ170 Series










































Reviews: