2. Power Connector: ATX Power Connector (20-pin block): ATX
ATX Power Supply connector. This is a new defined 20-pins connector that
usually comes with ATX case. The ATX Power Supply allows to use soft power
on momentary switch that connect from the front panel switch to 2-pins Power On
jumper pole on the motherboard. When the power switch on the back of the ATX
power supply turned on, the full power will not come into the system board until
the front panel switch is momentarily pressed. Press this switch again will turn off
the power to the system board.
* Please don’t turn off/on power supply too quickly. We recommend at least wait
4sec before turn on the power, to protect the system.
3. Keyboard Connector (5-pin female): ATKB
This connection is for a standard IBM-compatible or a 101 enhanced keyboard.
4. PS/2 Mouse Connector (5-pin block): PSMS
You must purchase an optional PS/2 mouse set for connection of 5-pins block to
mount on an open slot of your computer’s case.
16
