Video Off Method V/H SYNC+Blank
Switch Function Break/Wake
MODEM Use IRQ 3
Hot key Function As Disabled
HDD Off After Disabled
Power Button Function Instant-Off
> PM Wake Up Events Press Enter
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend
off,
All Modes
Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS
(default)
Initial display power management signaling.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function (Only for ATX Power Supply)
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
PM Wake-Up Events
Please refer to section 3-8-1
3-8-1 PM Wake up Events
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
PM Wake Up Events
36
(for ATX Power Support )
