When you put the CPU into the ZIF socket. No forces require to insert of the CPU,
then press the level to locate position slightly without any extra force.
2-3-4 Over clock Running
WARNING!
This section is for experienced motherboard installer only. Over
clocking can result in system instability or even shortening life of the
processor.
After setting the Jumper JP1 you can choose over clock running by BIOS CMOS
SETUP UTILITY. When you entered CMOS SETUP UTILITY, choose “Frequency/
Voltage control” you will see the screen as below then.
1. You can choose the situation you want to try.
CPU/SDRAM (MHz)
1-2
3-4
5-6
7-8
66/66
OFF
OFF
OFF
ON
66/100
OFF
OFF
OFF
OFF
100/100
ON
OFF
OFF
OFF
100/133
ON
OFF
ON
OFF
133/100
ON
ON
OFF
OFF
133/133
ON
ON
ON
OFF
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Frequency/Voltage Control
Cyrix III Clock Ratio Default
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
CPU Host/DRAM Clock Default
CPU Clock Ratio Jumpless x 3.0
Item Help
Menu Level >
12
CPU Host/DRAM Clock
Default [ ]
66/66MHz ..... [ ]
66/100MHz ..... [ ]
75/75MHz ..... [ ]
83/83MHz ..... [ ]
95/95MHz ..... [ ]
96/96MHz ..... [ ]
97/97MHz ..... [ ]
100/100MHz ..... [ ]
100/133MHz ..... [ ]
112/112MHz ..... [ ]
133/100MHz ..... [ ]
133/133MHz ..... [ ]
140/140MHz ..... [ ]
:Move ENTER:Accept ESC:Abort
