Current CPU Temperature/Current System Temp/Current CPUFAN, SYSFAN Speed/
Vcore/ Vcc/3.3V/+5V/+12V/-12V/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Frequency/Voltage Control
This section is for setting CPU Frequency Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
Cyrix III Clock Ratio Default
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
CPU Host/DRAM Clock Default
CPU Clock Ratio Jumpless x 3.0
Item Help
Menu Level >
CyrixIII CPU Ratio
Adjust
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Cyrix III Clock Ratio
This item allows you to set Cyrix III Clock Ratio. The settings are Default, X3.0, X3.5, X4,
X4.5, X5, X5.5, X6, X6.5, X7.0, X7.5, X8.0.
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
CPU Host/DRAM Clock
This item allows you to set the CPU Host/DRAM Clock
The choice are: Default, 66/66Mhz, 66/100Mhz, 75/75MHz, 83/83MHz, 95/95MHz,
96/96MHz, 97/97MHz, 100/100MHz, 100/133MHz, 112/112MHz,
133/100MHz, 133/133MHz, 140/140MHz
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
40
