Jetter JetWeb JX2-CNT1, User Manual

Page: 93 / 100

JX2-CNT1 Appendices
Jetter AG 97
List of Appendices
Appendix A: Overview - Outputs
The JX2-CNT1 module provides 8 virtual outputs enabling parameterization via
controller. A reset will clear all outputs.
Output
Number
Name 1) Default value
2) Cross reference
Single-channel counter
xx05 Counting Direction 1) Counting up
2) Page 59
0 = counting up
1 = counting down
Dual-channel c SSI encoder
xx03 Output of Master Position 1) Output of master position disabled
2) Page 87
0 = output of master position disabled
1 = output of master position on the system bus enabled
xx04 Encoder Selection 1) Dual-channel counter enabled
2) Page 75, Page 61
0 = dual-channel counter enabled
1 = SSI encoder enabled
Dual-Channel Counter
xx01 Signal Activation 1) STR enabled / REF disabled
2) Page 64
0 = STR enabled / REF disabled
1 = STR disabled / REF enabled
STR -> strobe function; REF -> reference function
(When this bit is set to 1, bit 3 in register 3xx3 "Status / Controller"
is reset automatically)
xx02 Counter Type 1) Dual-channel counter
2) Page 62
0 = dual-channel counter
1 = single-channel counter
SSI Encoder
xx06 Signal Coding 1) Gray code
2) Page 75
0 = Gray code
1 = binary code
xx07 Activation of Parity Check 1) Parity check disabled
2) Page 75
0 = parity check disabled
1 = parity check enabled