Jetter AG
Programming | 8
User Manual – JetControl 365MC
100 / 148
8.15 JCF-SV1 "simple servo function"
The JCF-SV1 function lets you implement a simple, but convenient positioning of
servo or variable speed drives via analog setpoint input.
Up to 16 axes can be operated independently of each other.
Type
Number of servo
axes
Minimum HW
Rev.
From OS version
JC-365MC
16
1.05
1.30
Configuration
Connectivity to process variables, such as set position, actual position, reference
and limit switch, is provided by JX3 IO modules. These modules can be con-
nected directly via the local JX3 system bus of the controller or in distributed
mode via the JX3-BN-ETH bus node.
Integrated
Development
Environment
To create the application program, use JetSym version 5.x or higher.
Function with
JCF-SV1
The JCF-SV1 function is accessed via the register interface.
Commands, such as POS, and AXARR, or a Motion API are not available.
INFO
Further information
For more information on this subject refer to the application-oriented manual
JCF-SV1 OS Function
available for download from our
