manualshive.com logo in svg

Jetter JetControl 365MC, User Manual, Page: 38 / 148

Share
Download
Jetter JetControl 365MC User Manual Download Page 38

Jetter AG

Electrical connection | 6

User Manual – JetControl 365MC

38 / 148

6.2.6 Slot X61 - SD Memory Card

The SD card slot is for accommodating standard SD memory cards. The con-
troller accesses data stored on the SD card which is used as file system exten-
sion.

Inserting the 
SD card

►

Insert the SD card into the SD slot as illustrated below.

ð

If the SD card is inserted correctly, the 

SD

 status LED lights up for 300 ms.

Removing the SD
card

NOTICE

Loss of data

►

Make sure the SD card is not accessed, while you are re-
moving it.

►

First, close all files which are stored to the SD card.

1.

Push the SD card further into the slot and release it.

ð

The SD card is released from the card slot.

2.

Pull the SD card straight out.

ð

If you have removed the SD card, the 

SD

 status LED lights up twice for 100

ms.

Summary of Contents for JetControl 365MC





















































































































































Reviews:

No comments