©2017 Jetta Corporation
.
All rights reserved. REV 01/2017
INSTALLATION INSTRUCTION
FREESTANDING BATHS
Rough-In:
Test fit the tub, and verify dimensions. Carefully level the unit, ensuring that uniform support is given to all of the feet and that no
portion of the tub shell is bearing weight.
Site Preparation:
•
The site should be cleared of debris and vacuumed. This will ensure that the bathtub is leveled properly.
•
Check if the floor is leveled and solid. The level should be in a range that can be compensated for by the use of adjustable feet. An
average sized bathtub can weigh as much as 1000 lbs when full, the floor must be able to support this weight.
•
An opening of 6” x 12” should be provided in the floor for the bathtub drain and overflow. Make sure there are no obstructions in
this space.
•
The plumbing rough-in for both the drain and the supply lines should be completed by a licensed plumber before the bathtub is
moved into its final position.
Protective Foam Packaging:
The adjustable feet are protected with foam packaging around each foot to ensure the quality of the bathtubs
during transportation. Remove foam protectors prior to installation.