OWNER'S MANUAL
© 2017 Jetta Corporation
.
All rights reserved. REV 01/2017
WWW.JETTACORP.COM
1(800) 288-7771
LED MESSAGES
System Error Detection
If an error occurs in the bath system, the red ERROR LED will flash.
In addition, the three remaining LEDs stay lit in a specific on/off pattern that reveals a diagnostic code of the error. If
this occurs, take note of which of the three lights are on or off. This information will help technical support in diagnosing
the error.
System Reset
Press and hold the two top buttons simultaneously for 10 seconds to turn off all equipment. Continue to hold the
two top buttons 10 seconds longer to restart the system.
BATH CONTROL INSTALLATION
Unplug Blower from Power Outlet
When installing or changing a control panel, unplug the blower from the wall outlet to remove
source power. Install the power cord into the wall only after all connections have been made,
which include: bath control panel and cables, LED light and cables, and the water detect
cable (if equipped).
AFFINITY BATH KEYPAD CONTROL
$
)),1,7<