8
The front face of the fireplace should be reasonably flat over the area covered by the outer firebox top and side
flange seals to ensure good sealing. These faces should be made good if necessary.
The appliance must not stand on combustible materials or carpets.
Unpacking
Handling - Adequate facilities must be available for loading, unloading and site handling.
The fire and the following components are packed in several cartons. Take care when unpacking the fire to avoid
accidental damage. Particular care should be taken with the glass door and the air control mechanism.
Ensure that all the listed items are present before commencing installation.
•
Firebox consisting of an outer box and an inner firebox
•
Finishing Frame
•
Flue Adaptor
•
Roll of Fibre Insulation for back and sides
•
Sheet of White Ceramic Insulation for top (2 layers)
•
Door operating tool
•
Installation & Operating Instructions
•
Guarantee card
Optional external air kit consisting of:
Optional Basket for burning smokeless fuel -
1. Flexible air pipe
63mm x1 2. Clamp x1
60i and 70i
Optional Hot air ducting kit consisting of
1. Flexible pipe
150mm x1 2. Flexible pipe spigot attachment x1
3. Clamps x 2 4. Closable air grille x1 5. Bolts for pipe spigot attachment x 3
INNER
OUTER
FINISHING
FLUE
STANDARD
BOX
BOX
FRAME
COLLAR HANDLE