Installation & Operation manual of Jetmaster Vent Free Drop In Fireplace
Page 9
Revision 02 @ 04/09
FITTING FINISHING COMPONENTS
STEP 1
The top cover can now be fitted over the steel frame.
First connect the Infra Red sensor (IR Sensor) to the outer cover. The connection point is on the inside of one of
the short sides of the top cover.
Lift the spring loaded clip, and slide the sensor into place. The raised section of the sensor must be located in the
cut-out section in the cover, with the spring loaded clip, holding it in place.
Viewed from outside
Viewed from inside
Summary of Contents for DROP IN 1020
Page 1: ......