Installation & Operation manual of Jetmaster Vent Free Drop In Fireplace
Page 12
Revision 02 @ 04/09
The final phase of the installation is to verify the flame pattern, and to confirm that the unit functions correctly.
Switch on the unit and monitor the flame pattern.
Now that the pebbles are fitted, the flame pattern will be different from before. Stable flames should extend through
the openings between the pebbles on the central row of pebbles.
If soot is forming on any pebble, it can be moved away from the impinging flame slightly, to reduce soot.
Verify that the unit functions properly while switching between all settings being:
•
ON
•
OFF
•
High Flame
•
Low Flame
•
Stand Bye.
NOTE: The “FAULT FINDING” guide in this manual provides guidance on how to address any doubtful flame
patterns.
WIRING DIAGRAM
Item
Description
Item
Description
1
Control module
2
Power cable
3
Battery 7.2V
4
Wall control panel
5
Control valve
6
Thermocouple
interrupt
7
Pilot assembly
Summary of Contents for DROP IN 1020
Page 1: ......
