DE LUXE GAS GRATES / INSTALLATION AND OPERATING INSTRUCTION MANUAL
12
Fit the left and right hand pre-formed coal segments on the respective sides of the centre
back board. The side pieces should be inserted into the tray in such a way that their
bottom ends make contact with the rear edge of the front segments.
Step 4:
Select the larger kind of the oval shaped coals and place these cross-wise in such a way
that they form a bridge over the gap between the front coal pieces and the centre rear
board. Leave a gap of approximately 5 to 10mm between each coal. Do not force the
coals down into the gap, but rather loosely place over the gap between the front coal
segments and the rear pre-formed coal board.
Quantity of oval coals, first row f
or a 550 De Luxe Gas Convector: …
4
Quantity of oval coals, first row fo
r a 700 De Luxe Gas Convector: …
6
Quantity of oval coals, first row for an 850 De Luxe Gas Convector: .. 9
Quantity of oval coals, first row for a 600 De Luxe Gas Grate:
……..… 5
Quantity of oval coals, first row for a 700 De Luxe Gas Grate:
……..… 6
Quantity of oval coals, first row for an 850
De Luxe Gas Grate: …..….
9
Quantity of oval coals, first row for an 850 De Luxe Gas Grate:
….….
10
Step 5:
