Jet JHM-610, Operating Instructions And Parts Manual

Page: 6 / 16

6
Specifications
Model Number ........................................................................................................................ JHM-610
Stock Number .......................................................................................................................... 350200
Spindle stroke ...............................................................................................................1-3/16" (30mm)
Maximum Distance, Spindle to Column ...........................................................................5-1/2" (140mm)
Swing Diameter ............................................................................................................................... 11”
Maximum Distance, Spindle Nose to Table.................................................................... 10-1/2" (267mm)
Maximum power .......................................................................................................................... 150W
Spindle speeds ...................................................................... Low:100-1000 RPM; High:100-2000 RPM
Maximum X Travel .............................................................................................................................7"
Maximum Y Travel .............................................................................................................................7"
Maximum Z Travel ........................................................................................................................... 10"
X, Y, Z Graduations ............................................................................... (X) 0.001”, (Y) 0.001", (Z) 1/16"
Spindle taper ................................................................................................................................. MT2
Drilling Capacity................................................................................................................. 1/2" (10mm)
End Milling Capacity .......................................................................................................... 1/2" (10mm)
Face Milling Capacity ............................................................................................................ 1" (25mm)
Column Tilt ............................................................................................................................ 45° L & R
Table Size .......................................................................................................................9-3/8” x 5-3/4”
Table Slot..................................................................................................................................... 5/16”
Overall Height at Max. Capacity ........................................................................................................ 28”
Base Size...................................................................................................................... 13-1/2” x 8-1/2”
Motor ...................................................................................... 1/5 HP (150W) DC, 1 Phase, 120V, 1.8A
Machine weight ........................................................................................ 119 lb. (shipping), 88 lb. (net)
The specifications in this manual are given as general information and are not binding. Walter Meier
(Manufacturing) Inc., reserves the right to effect, at any time and without prior notice, changes or
alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.