Jet JHM-610, Operating Instructions And Parts Manual

Page: 11 / 16

11
Maintenance
Always unplug the power
cord before performing any inspection,
maintenance, or cleaning.
Before Each Use
ˆ
Inspect the general condition of the
machine.
ˆ
Check for loose screws, misalignment or
binding of moving parts.
ˆ
Check for cracked or broken parts.
ˆ
Check for damaged electrical wiring.
ˆ
Check for any other condition that may
affect its safe operation.
If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not
use damaged equipment.
Daily
ˆ
With a soft brush, cloth, or vacuum, remove
all debris from the machine.
ˆ
Use a premium quality, lightweight machine
oil to lubricate all moving parts.
Optional Accessories
350213 .... Stand
350203 .... MT-2 Collets (6 pieces: 1/8, 5/32, 3/16, 1/4, 5/16 and 3/8 in.)
350204 .... Vise, 50x50mm
350205 .... Clamping Kit (24 pieces)
350206 .... Milling Arbor
350207 .... MT-2 Boring Bar
350208 .... Quick Vise with Swivel Base
350209 .... HSS Endmills (6 pieces: 1/8, 5/32, 3/16, 1/4, 5/16, and 3/8 in.)
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.waltermeier.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.