1 888 275 4538
MVP GROUP
.6 |
P a g e
2 - INSTALLER AND MAINTENANCE PERSON INSTRUCTIONS
ATTENTION
Specialists that install the machine are foreseen to train the operators about machine utilization and safety
procedures to be followed. They must provide a real “demonstration” and verify that machine instructions
are available to the operators.
Following attentions should be taken:
WARNING!
DO NOT OPEN THE DOOR QUICKLY IF CYCLE IS NOT ENDED.
DO NOT DIP BARE HANDS IN WASHING SOLUTION.
DO NOT TAKE OFF THE MACHINE PANELS IF THE MACHINE HAS NOT BEEN DISCONNECTED FROM THE
POWER AND WATER SUPPLY.
DO NOT BYPASS THE MACHINE PROTECTIONS (MICROSWITCHES, PANELS, OR OTHERS)
PROVIDED BY THE MACHINE MANUFACTURER IF NOT AT THE PRESENCE OF TRAINED SPECIALISTS THAT
CAN TAKE PROPRER PRECAUTIONS.
DO NOT UTILISE THE MACHINE TO WASH GOODS OUTSIDE THE SCOPE FOR WHICH IS PROVIDED FOR,
OBJECTS OF SHAPE, TYPE, SIZE, AND MATERIAL NOT COMPATIBLE.
DO NOT OPERATE THE MACHINE IF NOT PROPERLY CONNECTED, ACCORDING TO THE SPECIFICATIONS
AND REQUIREMENTS OF THE LOCAL LAW AND PRESCRIPTION OF MANUFACTURER, MAKING SURE THAT
ALL SAFETY DEVICES ARE OPERATIVE.
ID/RATING/DATA PLATE
ID/Rating plate of the appliance contains identification and technical data and is located on the front inside
panel.
- To remove the front panel: Unscrew the two screws located on the bottom of the panel.
2A – WATER CONNECTION
N.B.
Shut-off valve is a single direction, diaphragm control type, which can shut water supply off quickly and
totally. Selected to assure water pressure and flow as requested in the data diagram supplied with each
machine.
1- Position the dishwasher to its final location and level the appliance by turning the relative height
adjustable feet. (Fig.5)