1 888 275 4538
MVP GROUP
.20 |
P a g e
Fig.43
3- Wash and clean filters accurately on running fresh water.
4- Put all filters and components back inside the machine.
3D5 – CLEANING OF EXTERNAL SURFACES
Before carrying out any cleaning operations, turn off the power at the main breaker box.
To reduce the emission of pollutants into the environment, clean the appliance (externally and where
necessary internally) with products having a biodegradability of over 90%.
WARNING!
CLEAN STAINLESS STEEL SURFACES BY USING WARM SOAPY WATER; NEVER USE DETERGENT
CONTAINING ABRASIVE SUBSTANCES NOR STEEL SCRAPERS, COMMON WIRE WOOL, BRUSHES OR
SCRAPES; RINSE THOROUGHLY USING A WET CLOTH AND CAREFULLY WIPE DRY.
DO NOT WASH THE APPLIANCE BY USING DIRECT OR HIGH PRESSURE WATER JETS.
3D6 – TURNING OFF THE MACHINE
1- Drain out completely the water from the tank. (see par.3D1/2/3)
2- Turn OFF the machine by pressing button “H” On/Off.
3- Close the door and turn off the power at the mains.
3F – WARNING MESSAGES DISPLAYED ON THE CONTROL PANEL
(Electronic version only)
N.B.
If the machine is in OFF mode, warning messages are not displayed. Turn ON the machine to visualize the
type of warning message on the appliance. Following warning messages on the display are provided:
ntcb
